Drive-in & Drive-through Racks offer the ability to store a large amount of similar loads in a smaller area. Selectivity is sacrificed but the storage density is outstanding. Drive-in racking can store up to 75% more pallets in the same space than selective racking – depending on the application. It requires fewer aisles and has better cubic storage.

Drive-In Racks allow a lift truck to enter the rack from one side to pick up or pull out pallets. This is done because pallets can slide backwards on a continuous rail. Fork lifts drive into the rack to access pallets two or more deep. You are limited in the depth of storage for a particular bay by the size of your facility.

This is a Last-In, First-Out arrangement.

This is a First-In, First-Out arrangement.

Basic Components

Frame & Upright :
Same as in Selective Picking Pallet Racks

Pallet Runner :
Pallets are kept on a pair of runners which run throughout the depth of a system. The runner’s side profile acts as a guide for pallets

Runner Brackets :
These are mounted on the upright frame and support the pallet runner

Joining Piece :
Used to join runners

Beams :
Beams are direct load carrying horizontal members used to connect the vertical frame from top laterally, to make it a cohesive structure

Top Runners :
Members to connect frames from top longitudinally and not for loading purpose

Top Bracings :
Diagonally connected to top runners for better stability of system

Guide Rails (Optional) :
Fixed to the ground with the help of anchor bolts and provided to guide fork lift. Fork lift also needs to be attached with side guide rollers